Samsung LN46A630M1FXZA User Manual (ENGLISH) - Page 62

Using the Energy Saving Feature This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving " mode option to "High" to reduce eye fatigue as well as power consumption. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER button. Select the required option (Off, Low, Medium, High, Auto) by pressing the ▲ or ▼ button. Press the ENTER button. • Off: Turns off the energy saving function. • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode. • Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes. Press the EXIT button to exit. Setup Setup External Settings Entertainment : Off Energy Saving : Off ► PIP Software Upgrade External Settings Entertainment : Off Energy Saving : OOffff ► PIP Software Upgrade Low Medium High Auto Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV. 1. Insert a USB drive containing the firmware upgrade into the WISELINK port on the side of the TV. TV Side Panel HDMI IN3 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "Software Upgrade", then press the ENTER button. 4. Press the ENTER button. The message "Scanning for USB... It may take up to 30 seconds." is displayed. Setup USB Drive Energy Saving : Off PIP Software Upgrade ► 5. The message "Upgrade version XXXX to version XXXX? The system will be reset after upgrade." is displayed. Press the ◄ or ► to select the "OK", then press the ENTER button. Software Upgrade Scanning for USB..... It may take up to 30 seconds. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. Software Upgrade Upgrade version XXXX to version XXXX? The system will be reset after upgrade. OK Cancel English - 60