Samsung LN46C530F1F Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

Step 5 : Run Plug & Play When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV's channel memorizing process. It also displays connection instructions similar to those in this guide. To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the EnterE button. To skip a screen, press the Menu button. To turn on your TV, press the Power button on the remote or press the Power button on the TV. To run Plug & Play, follow these steps: Plug & Play Select Language of the OSD. English Language : EnEgslpisahñol Français U Move E Enter 1. On the Language screen, select the language for the On Screen Display (OSD) using your remote control, and then press EnterE button. The Home Use screen appears. 2. Select Home Use, and then press EnterE button. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes. After you press EnterE button, the Antenna Source screen appears. 3. If your TV is only attached to an antenna, select Air. If your TV is only attached to cable and you have no cable box, select Cable. If your TV is attached to an antenna and cable with no box, select Auto. When done, press EnterE button on your remote. The Select Cable System screen appears. IMPORTANT: If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box. 4. If your TV is attached to a cable system and you have no cable box, you must select your cable system type. If you have Digital cable, you must select the cable system type for both Analog and Digital. After you have selected the cable system type, select Start, and then press the EnterE button on your remote. ✎✎ Most cable systems are Standard (STD) systems. If you are not sure about what kind of cable system you have, contact your cable company. 5. The TV memorizes the available channels. This process can take up to 45 minutes. After the TV has memorized the channels, the Clock Mode screen appears. 6. Choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don't, or if you have a cable or satellite box. When done, press EnterE button. The Daylight Savings screen appears. ✎✎ If you select Manual, the clock setting screen appears. 7. Select the daylight saving time setting: Off, On, or Auto, and then press EnterE button. 8. After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section. 9. The Enjoy your TV screen appears. and then press EnterE button. Basic Functions Selecting a Source To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the Source button on your remote. Each time you press the Source button, you change to a different source. Remote Control Buttons and Functions: PRE-CH ✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons. Turns the TV on and off. Press number buttons for direct access to channels. Press to switch between the sources (Blu-rayCHpLIlSaT yer, cable box, DVD player, etc.) connected to your TV. MEDIA.P MENU FAV.CH TOOLS INFO Press to select additional digital channels broadcast by the same station. For example, to select channel 54-3, press 54, press -, and then press 3. Adjusts the volume. Displays the channel list on the screen. View the Media Play. Quickly selects frequently used functions. Selects the on-screen menu items and changes the values seen on the menu. Return to the previous menu. Colored buttons for use in the Channel List, Media Play menu, etc. Use these buttons in the Media Play and Anynet+ modes. ( : controls recording on Samsung recorders with the Anynet+ feature) PRE-CH CHLIST MEDIA.P MENU FAV.CH TOOLS INFO RETURN EXIT RETURN EXIT Return to the previous channel. Cut off the sound temporarily. Change channels. S.MODE SLEEP MTS P.MODE P.SIZE CC Displays the main on-screen menu. Displays Favorite Channel Lists on the screen. Press to display information on the TV screen. Exit the menu. S.MODE SLEEP MTS P.MODE P.SIZE CC S.MODE: Selects the sound mode. SLEEP: Setting the Sleep Timer. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P.MODE: Selects picture mode. P.SIZE: Choose the picture size. CC: Controls the caption decoder. Changing the Screen Size Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P.Size button on your remote. The first time you press it, your TV displays the current setting. There after, each time you press the P.Size button, you change the size of the picture on the screen. The following sizes are available: Changing Channels and Adjusting the Volume PRE-CH PRE-CH Volume CHLIST Adjust the voluMmEDIAe.P byMEpNUressFAiVn.CHg the y butTOtOoLSn on the remote. INFO RETURN EXIT Channel CHLIST ChanMgEDIAe.P theMENcUhanFAnV.CeHls by pressing the z TOOLS button on the remote. INFO ✎✎ If your TV is attached to a cable or satellite box, you change the RcEThURNannel usingEXITthe box's remote. 16:9 Wide screen Zoom 1 Zoom 2 You can also chanSg.MOeDE theSLEEP MTS channels by pressPi.nMOgDE theP.SIZE CC z buttons on the front panel of your TV and adjust the volume by pressing the y buttons. S.MODE SLEEP MTS P.MODE P.SIZE CC Remote control sensor Power Indicator Wide Fit 4:3 Standard screen Screen Fit ✎✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff on any side. It is only available when your TV inputs an HDMI (720p, 1080i, 1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal. Changing the Picture Mode Your TV has four preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. The Picture Modes are listed and described in the table below: Mode Dynamic Standard Natural Movie Description Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room. For a bright, detailed picture in a normally lit room. For a comfortable, easy-on-the-eyes picture in a normally lit room. For a studio quality cinema picture in a dimly lit or dark room. To change the Picture Mode, follow these steps: 1. Turn on your TV. 2. Using your remote, press the Menu button on your remote. Then, select Picture → Mode. 3. On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want. 4. Press the Exit button to exit the menu. PRE-CH Viewing the On Screen Menus To view the On Screen Menus, follow these steps: 1. With the power on, press the Menu button on your remote. The main menu appears. The menu's left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application, and Support. CHLIST Menu MEDIA.P MENU FAV.CH TOOLS INFO 2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the EnterE button. RETURN EXIT 3. When done using the menu, press the Exit button on your remote to exit. Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV. 2. Using your remote, press the Menu button on your remote. Then, select Setup → Time. 3. Select Clock Mode, and then press the EnterE button. Set Clock Mode to Auto or Manual. ✎✎ Select Auto if you have a digital channel in your area and are not using a cable/sat box. Clock Set Month Day Year -- -- ---- Hour Minute am/pm -- -- -- L Move U Adjust E Enter R Return When you set Clock Mode to Manual 4. Select Clock Set, and then press the EnterE button. The Clock Set screen appears. 5. Using the number buttons on your remote, enter the month, day, year, hour, and minute. Use the ◄ or ► button to move between entry fields. 6. Press the Return button on your remote when done. Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. To connect a USB device for Media Play, follow these steps: 1. Turn on your TV. 2. Connect a USB device containing photo, music and/ or movie files to the USB (HDD) jack on the side of the TV. 3. When the Application selection screen appears, press the EnterE button on your remote to select Media Play (USB). MediaPlay Videos SUM A Change Device TV Side Panel USB Drive D View Devices E Enter R Return S.MODE SLEEP MTS P.MODE P.SIZE CC BN68-02610C-01 English - 2