Samsung LN55A950D1F User Manual (ENGLISH) - Page 12
Connecting to a Cable Box that Descrambles Some Channels, ANT IN, VHF IN or simply, IN.
View all Samsung LN55A950D1F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.) 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. ➣ This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". ANT IN Incoming cable Splitter 2. Connect this cable to a two-way splitter. 3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box. 4. Connect an RF cable between the ANT OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. Incoming cable Incoming cable Incoming cable 5. Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. Incoming cable Splitter Splitter Cable Box Splitter Cable Box RF (A/B) Switch Splitter Cable Box Cable Box RF (A/B) Switch RF (A/B) Switch ANT IN TV Rear 6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV. After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) English - 10