Samsung LN55C750 User Manual - Page 43
Listening through a Receiver, Troubleshooting for Anynet
View all Samsung LN55C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
04 Advanced Features ¦ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. NOTE You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers' products. ¦ Troubleshooting for Anynet+ Problem Anynet+ does not work. I want to start Anynet+. I want to exit Anynet+. The message 'Connecting to Anynet+ device...' appears on the screen. The Anynet+ device does not play. The connected device is not displayed. The TV Program cannot be recorded. The TV sound is not output through the receiver. Possible Solution Ř Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Ř Only one receiver (home theater) can be connected. Ř Check if the Anynet+ device power cord is properly connected. Ř Check the Anynet+ device's Video/Audio/HDMI cable connections. Ř Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Ř Check whether the TV remote control is in TV mode. Ř Check whether the remote control is Anynet+ compatible. Ř Anynet+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (initial setup), etc.) Ř When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. Ř Check if the Anynet+ Function of Anynet+ device is set on. Ř Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Ř Press the TOOLS button to display the Anynet+ menu and select a menu you want. Ř Select View TV in the Anynet+ menu. Ř Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Ř Press > CH