Samsung LTN1535 User Manual (user Manual) (ver.1.0) (English) - Page 23
Storing Channels in Memory Automatic Method, To check the channels stored in memory, To select
View all Samsung LTN1535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
13-29 5/30/03 10:42 AM Page 17 O P E R AT I O N Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (Ant, STD, HRC, IRC). See steps 1~2 on previous page. Press the MENU button. Press the UP/DOWN buttons to select "Channel", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Auto program". 3 Press the ENTER button. The TV will begin memorizing all of the available channels. 4 After all the available channels are stored, the Auto program menu reappears. Press the Exit button. The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press ENTER at any time to interrupt the memorization process and return to the CHANNEL menu. To check the channels stored in memory Press the ch( / )button. Only the channels stored in memory are selected. To select channels over 100 Ex) Press to select cable channel 108. In case of Ant is "Not available". English-17