Samsung LTN406W User Manual (user Manual) (ver.1.0) (English) - Page 31
Memorizing the Channels
View all Samsung LTN406W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
BN68-00448R-00Eng_04 7/23/03 1:53 PM Page 23 O P E R AT I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). 1 Press the MENU button to display the menu. Press the UP/DOWN buttons to select "Channel", then press the ENTER button. 2 Press the UP/DOWN buttons to select "Air/CATV", then press the ENTER button. Repeatedly press the UP/DOWN buttons to cycle through these choices: Air, STD, HRC or IRC (all cable TV). Press the UP/DOWN buttons to select the video signal source, then press the ENTER button. Note : STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory" (next page). English-23