Samsung M2835DW User Manual - Page 111

Installing driver over the network 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 104). 2 From Charms, select Settings > Change PC settings > Devices. 3 Click Add a device. Discovered machines will be shown on the screen. 4 Click the model name or host name you wish to use. Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on your computer. You can start the silent installation by typing /s or /S in the command window. Command-line Parameters Following table shows commands that can be used in the command window. You can print a Network Configuration Report from the machine's control panel that will show the current machine's host name (see "Printing a network configuration report" on page 140). Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. 5 The driver is automatically installed from the Windows Update. Command- line /s or /S Definition Starts silent installation. Description Installs machine drivers without prompting any UIs or user intervention. 2. Using a Network-Connected Machine 111