Samsung ME17R7021E Installation Guide - Page 13
B. Recirculating Non-vented Ductless, Cont.
View all Samsung ME17R7021E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step-by-step installation guide B. RECIRCULATING (NON-VENTED DUCTLESS) (CONT.) 4. Roll the blower unit 90 ° so that fan blade openings are facing toward the front of the microwave. Before Roll After Roll 8. Secure the blower to the microwave using the blower retaining screws from Step 1. Blower Retaining Screw 5. Place the blower unit back into the opening. Blower Retaining Screws Back of Microwave Oven CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched. 6. Remove the metal vent fan cover on the back of the microwave by sliding it up. B2. INSTALLING THE CHARCOAL FILTER 1. Remove screws on top of grille using a #1 Phillips screwdriver. 2. Open the door. 3. Remove the grille. • After push left, Pull the grille straight off. Charcoal Filter 7. Close the blower door. Slide blower shield onto the top of the blower door opening. 4. Install the charcoal filter. When properly installed, the wire mesh of the filter should be visible from the front. 5. Reinstall the grille and the screws. 6. Close the door. Insert mesh-side up 13 ME4000R_ME17R7021EB_AA_DE68-04584A-00_EN.indd 13 6/19/2019 4:17:42 PM