Samsung ME17R7021EG/AA Installation Guide - Page 10
D. Aligning The Wall Plate
View all Samsung ME17R7021EG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step-by-step installation guide D. ALIGNING THE WALL PLATE Hole A Centerline notches Draw a Vertical Line on Wall from Center of Top Cabinet Horizontal Line Area E CL Hole C Hole B Horizontal Line Draw a Horizontal line on wall from bottom of "Rear Wall Template˝. CAUTION: Wear gloves to avoid cutting fingers on sharp edges. 1. Draw a Vertical line on the wall at the center of the 30˝ wide space. 2. Draw a Horizontal line on the wall at the bottom of "Rear Wall Template". 3. Drill ⅝˝ holes for toggle bolts on 3 locations (Hole A, Hole B, Hole C) but if the location of hole is same as that of stud, drill a 3/16˝ hole for wood screw. In other words, toggle bolt can not be used to the location of stud. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. NOTE: Holes A, B and C are inside area E. If none of A, B and C is in a stud, find a stud somewhere in area E and draw a forth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the microwave. Set the mounting plate aside. 10 ME4000R_ME17R7021EB_AA_DE68-04584A-00_EN.indd 10 6/19/2019 4:17:38 PM