Samsung ME19R7041F Installation Guide - Page 17

E. Connect the ductwork for outside top exhaust, Equivalent to, Depth of Cabinet, Recess

Get Samsung ME19R7041F PDF manuals and user guides View all Samsung ME19R7041F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Step-by-step installation guide 3. Insert a self-aligning screw through the top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.) Be sure to keep the power cord tight. Be careful not to pinch the cord, especially when mounting flush to the bottom of the cabinet. CaCbabiinneettFFrornot nt CCaabbinienteBtotBtoomtStohemlf Shelf FFiilllleer rBlBoclkock EEqquuivaivleanltetont to DDeeppthtohf of Cabinet CRaebcineetsRsecess SSeelf-lAf-liAgnliinggnSicnregwScrew MicMricorowwaavveeOOvevneTonp Top 4. Attach the microwave oven to the top cabinet. 5. Insert the 2 self-aligning screws through the cabinet bottom and, if used, through the filler blocks into the outer top of the unit. (See the illustration above). Continue to support the unit until both screws are inserted and engaged at least two full turns, then fully tighten both screws until the unit is secure. E. CONNECT THE DUCTWORK FOR OUTSIDE TOP EXHAUST HoHuoussee DDuuctct 1. Extend the house duct down to connect to the exhaust adaptor. 2. Seal the exhaust duct joints using duct tape. 6. Install the grease filters. See the Owner's Manual packed with the microwave for instructions. NOTE: For models with installed grease filters, you do not need to install a filter ME4000R_ME19R7041FS_AA_DE68-04585A-01_EN.indd 17 17 2021-03-25 오전 11:43:21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
17
Step-by-step installation guide
3
. Insert a self-aligning screw through the top center
cabinet hole. Temporarily secure the oven by turning
the screw at least
two full turns
after the threads
have engaged. (It will be completely tightened later.)
B
e sure to keep the power cord
t
ight. Be careful not to
pinch the cord,
e
specially when mounting flush to the
bottom
of the cabinet.
Equivalent to
Depth of Cabinet
Recess
Cabinet Bottom Shelf
Microwave Oven Top
Cabinet Front
Filler Block
Self-Aligning Screw
4
. Attach the microwave oven to the top cabinet.
5
. Insert the 2 self-aligning screws through the cabinet
bottom and, if used, through the filler blocks into
the outer top of the unit. (See the illustration above).
Continue to support the unit until both screws are
inserted and engaged at least two full turns, then fully
tighten both screws until the unit is secure.
6
. Install the grease filters. See the Owner’s Manual
packed with the microwave for instructions.
NOTE
: For models with installed grease filters, you do
not need to install a filter
E.
CONNECT THE DUCTWORK FOR
OUTSIDE TOP EXHAUST
House Duct
1
.
Extend the house duct down to connect to the
exhaust adaptor.
2
. Seal the exhaust duct joints using duct tape.
ME4000R_ME19R7041FS_AA_DE68-04585A-01_EN.indd
17
ME4000R_ME19R7041FS_AA_DE68-04585A-01_EN.indd
17
2021-03-25
오전 11:43:21
2021-03-25
오전 11:43:21