Samsung ML-1630W User Manual (ENGLISH) - Page 24

Printing Configuration report Press and hold Stop/Clear button for about 4 seconds to print a machine report. Please review your machines User's Guide to learn of additional details. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: MAC Address : 00:15:99:41:A2:78 IP Address : 192.0.0.192 Setting IP address Firstly, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol Server) located on the network. In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons. • DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address on the report. • Static IP assignment: Use SetIP program to change the IP address from your computer. In an office environment, we recommend that you contact a network administrator to set this address for you. IP setting using the SetIP program The following procedure is based on Windows XP. This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. MAC address is a hardware serial number of the network interface and can be found in the Network Configuration Report. Note • You only need to run this program if your network requires a static IP address. Otherwise, you may proceed to the Configuring the machine's wireless network part of this document. If you are unsure of this requirement ask the system administrator or the person who has set up your local network. • You can only use the SetIP program when your machine is connected to a network or directly connected to a PC with the crossover network cable included with your machine. In most cases we recommend using the crossover cable. You will be asked to connect this cable in a moment. Installing the program 1 Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window. 2 Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.) 3 Double click Application > SetIP. 4 Double click Setup.exe to install this program. 5 Click OK. If necessary, select a language from the drop-down list. 6 Follow the instruction on the window to complete the installation. Starting the program 1 Connect your machine and the computer using crossover network cable. 2 Temporarily disable the computer firewall before continuing by doing the following: Window XP • Open Control Panel. • Double click Security Center. • Click Windows Firewall. • Disable the firewall. Macintosh OS • Open System Preferences. • Click Sharing. • Click the Firewall menu. • Turn firewall off. 3 From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP > SetIP. 4 Click on the icon(third from left) in the SetIP window to open the TCP/IP configuration window. 5 Enter the machine's new information into the configuration window as follows: • MAC Address: Find the machine's MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. Note MAC address is a hardware serial number of the machine's network interface and can be found in on the Network Configuration Report. 3.5