Samsung MX-ST40B/ZA User Manual - Page 22
Connecting a mobile device via Bluetooth, The initial connection, If the device fails to connect
View all Samsung MX-ST40B/ZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. Bluetooth device OR LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP 5 Sec * In battery mode, when the Sound Tower is power off, Bluetooth connection and the party audio app are not available. The initial connection 1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the "BT PAIRING" mode. (OR) Press the PAIRING button on the rear panel. 2. On your device, select "[AV] MX-ST4B Series" from the list that appears. • After the device is connected. The third light on the top panel blinks three times cyan, and the bluetooth light on the rear panel is steady on. 3. Play music files from the device connected via Bluetooth through the Sound Tower. If the device fails to connect • Sound tower will play voice prompt via bluetooth disconnected. • If a previously connected Sound Tower listing (e.g. "[AV] MX-ST4B Series") appears in the list, delete it. • Then repeat steps 1 and 2. What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can use the previously connected TV or mobile device to connect to Sound Tower. • BT PAIRING : In this mode, you can connect a new device to the Sound Tower. (Press and hold the PAIRING button on the remote control for more than 5 seconds or press the PAIRING button on the rear of the Sound Tower to enter the "BT PAIRING" mode.) ENG - 13