Samsung MX-ST50B/ZA User Manual - Page 16

Connecting the wireless Group Play mode You can connect up to ten Sound Tower systems with the wireless Group Play function. Green flashing POWER SUB 1 POWER HOST POWER SUB 2 1. Press the GROUP PLAY button on the HOST Sound Tower system, After "GROUP LED" solw blinks 10 seconds, "GROUP PLAY"LED will be fast blink (30s). 2. Press the GROUP PLAY button on the 2nd Sound Tower system (SUB 1)."GROUP PLAY"LED will be blink.And then SUB1 will be connected with HOST,"GROUP PLAY"LED of SUB1 and HOST will stop blinking and turn on. 3. Press the GROUP PLAY button on the 3rd Sound Tower system (SUB 2). Tone prompt instead the GROUP PLAY button on the system stops blinking. 4. If you want to add more Sound Tower systems, repeat step 3. 5. Play music on the HOST Sound Tower. Sound outputs from all the connected systems. NOTES • In Group play mode, "HOST" Sound Tower (Figure 1) can connect to the Samsung TV. After the connection is successful, the Group play mode automatically exits. • The wireless Group Play connection is available for MX-ST90B/MX-ST50B/MX-ST40B. • Environmental conditions or other factors with connected devices may have effect on playback quality. • If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play connection. Try step 1 to step 5 again. • The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available while in wireless Group Play mode. • The ADD STEREO button on the HOST Sound Tower system is not available while in wireless Group Play mode. • Long press "GROUP PLAY" in BT Source state to enter Group mode as "HOST". ENG - 7