Samsung MX-ST90B User Manual - Page 23

NOTES •• Analog audio cables are not supplied. •• Depending on the length or characteristics of the cable, there may be a difference in operating distance. •• AUX1 and AUX2 does not support wireless Stereo and Group Play mode. Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. Precondition •• When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance. •• Disconnect from any Samsung TV before connecting to a mobile device. •• SUB speaker can't connect to BT when using Group Play or Stereo mode. Blue Blinks Bluetooth device OR Pairing (blinks) Connected 1. Press the PAIRING button on the rear panel of sound tower. (OR) P ress and hold the PAIRING button on the remote control for more than 5 seconds to enter the "BT PAIRING" mode. 2. On your device, select "[AV] MX-ST9B Series" from the list that appears. •• After the device is connected. The light bar will all be lit cyan, and the Bluetooth light on the rear panel is solid. 3. Play music files from the device connected via Bluetooth through the Sound Tower. NOTES If the device fails to connect •• Sound tower will beep if BT is disconnected. •• If a previously connected Sound Tower listing (e.g. "[AV] MX-ST9B Series") appears in the list, delete it. •• Then repeat steps 1 and 2. Bluetooth connection •• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Sound Tower and the Bluetooth device exceeds 32.8 ft (10 meters). ENG - 17