Samsung MX-T50 User Manual - Page 15

•• All slave units must be connected one by one. For example, after Host is connected, press GROUP PLAY button on slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and slave 3 one by one sequentially. •• While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth connection is disabled. •• Bluetooth devices can search and connect with the host Party Audio only. •• When in Group Play mode, the slaves cannot connect to a Bluetooth device. •• If you power off and then power on the Party Audio or select any source other than BT on a slave unit, in Group Play mode, the Group Play mode is disconnected. •• This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play is connected or press the GROUP PLAY button (Host or Slaves) before Group Play is connected. •• "OFF-GROUP PLAY" appears on the display and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the slave units or turn off the host Party Audio, the Group Play mode is disconnected. •• If the disconnection is made from the host Party Audio, Group Play is disconnected. LED Indications LED Green Red STATE Blink Solid Solid Description Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. ENG - 9