Samsung MX-T70/ZA User Manual - Page 26

08 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ;; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ;; See the Bluetooth connection sections on page 13. Sound is not produced. Is the Mute function on? ;; Press the (Mute) button to cancel the mute function. Is the volume set to minimum? ;; Adjust the Volume. The remote control does not work. Are the batteries drained? ;; Replace them with new batteries. Is the distance between the remote control and Party Audio main unit too far? ;; Move the remote control closer to the Party Audio main unit. Stereo Group connection is not working. Is the system in wireless Group Play mode? ;; Disconnect the wireless Group Play mode and try Stereo Group connection again. It cannot make a Bluetooth connection. Is the system connected to another system in wireless Group Play mode or Stereo Group mode? ;; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection. Are the two Bluetooth devices already connected? ;; Try Bluetooth connection again after disconnecting other Bluetooth connections. The PAIRING button is not working. Is the system in wireless Group Play mode or Stereo Group mode? ;; Try again after disconnecting the wireless Group Play or Stereo Group connection. I want to switch the host system to the other in wireless Group Play or Stereo Group connection. ;; Disconnect Group Play mode, press the Speaker which you want make to host first, and after it displays "HOST" message, connect the others one by one. ;; With Stereo Group mode, host is fixed. You can not change others as host. I want to play AUX1 or AUX2 more than 8 hours without control input. ;; Press and hold the button for more than 5 seconds in AUX1 or AUX2 mode to disable Auto Power Down Function. Change from ON-AUTO POWER DOWN to OFF-AUTO POWER DOWN. ENG - 22