Samsung NA30N6555TS/AA User Manual - Page 17
Smart Connect, SmartThings Application
View all Samsung NA30N6555TS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using the cooktop burners NOTE The Smart Connect button is below the RF control knob. If you need to press the Smart Connect button, remove the RF control knob by grasping it and then pulling it straight up. Smart Connect button Smart Connect LED indicator To monitor the cooktop remotely 1. Make sure the Smart Connect LED indicator turns on. If the Smart Connect LED indicator does not turn on, press the Smart Connect button. The cooktop can now be monitored remotely with a connected remote device. 2. Select the cooktop icon on the SmartThings app to open the cooktop monitor app. Smart connect on/off If you set the Smart Connect to Off, mobile devices cannot connect to the cooktop. To turn Smart Connect on, follow these steps: 1. Pull the RF control knob straight up to remove it. 2. Press the Smart Connect button. NOTE The Smart Connect LED indicator is on when Smart Connect is enable. The Smart Connect LED indicator is off when Smart Connect is not enabled. 3. Put in the RF control knob. NOTE • The cooktop continues operating even if the Wi-Fi connection is lost. • SmartThings Application will not work properly if the Wi-Fi Connection is unstable. • See the SmartThings app manual for detailed information. • For further instructions, refer to the SmartThings app web manual at www. samsung.com NA30N6555TG_DG68-01089A-02_EN+MES+CFR.indb 17 English 17 2018-08-29 4:21:20