Samsung NA30N9755TS/AA User Manual - Page 20
Control knobs, Burner grates and components, CAUTION
View all Samsung NA30N9755TS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Care and cleaning of the cooktop Care and cleaning of the cooktop Control knobs Make sure all surface burner knobs are in the OFF position. 1. Pull knobs off the control valve stems 01 2. Clean the knobs in warm, soapy water. Then rinse and dry them thoroughly. 3. Clean the stainless steel surfaces using stainless steel cleaner. 4. Re-attach the knobs in the OFF position to the control valve stems. CAUTION • Do not clean the control knobs in a dish 02 washer. • Do not spray cleansers directly onto 01 Grasp each knob and pull straight up to remove. 02 Spill protector. Do not remove. the control panel. Moisture entering the electric circuits may cause electric shock or product damage. Burner grates and components Turn off all surface burners and make sure they have all cooled down. 1. Remove the burner grates. 2. Remove the burner caps from the burner heads. 3. Remove the burner heads from the valve manifolds to reveal the starter 2 1 3 electrodes. 4. Clean all removable grates and burner components in warm, soapy water. Do not use steel-wool pads or abrasive cleaners. 5. Rinse and dry grates and burner components thoroughly. 6. Return the burner heads to their positions on top of the manifold valves. Make sure a starter electrode is inserted through the hole in each burner head. 7 8 6 NOTE See pages 22, 23, and 24 for detailed burner component re-assembly instructions. 7. Return the burner caps to their positions on top of the burner heads. To ensure proper and safe operation, make sure the burner caps lie flat on top of the burner heads. 8. Re-install the burner grates in their respective positions. 9. Turn on each burner and check if it operates properly. After verifying that a burner operates normally, turn it off. 20 English NA36N9755TM_DG68-01090A-02_EN+MES+CFR.indb 20 2018-08-29 4:22:25