Samsung NA30R5310FG/AA User Manual - Page 18
Burner caps and heads, Burner bases, Electrodes, NOTES, CAUTION
![]() |
View all Samsung NA30R5310FG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Care and cleaning of the cooktop Burner caps and heads NOTES Before removing the burner caps and heads, remember their size and location. Replace them in the same location after cleaning. Wash burner caps and burner heads in hot, soapy water and rinse with clean running water. You may scour with a plastic scouring pad to remove burned-on food particles. Use a sewing needle or twist tie to unclog the small holes in the burner head, if required. CAUTION • Do not wash any burner parts in a dishwasher. • Do not use steel wool or scouring powders to clean the burners. Burner bases CAUTION The burner bases cannot be removed for cleaning. Round burner base Electrode Make sure that no water gets into the burner bases and the brass gas orifices. Wipe clean with a damp cloth. Be careful not to scratch, deform, or damage the bases. Allow them to dry fully before using. Electrodes CAUTION Do not attempt to remove the electrode from the cooktop or burner bases. Be careful not to push in any cooktop 01 controls while cleaning the cooktop. A slight electrical shock might result which could cause you to knock over hot cookware. Make sure that the white ceramic electrodes 02 in the cooktop are clear of soil and dry. Clean the metal part of the electrode with a soft cloth. Do not use water to clean the 01 Clean this metal part igniters. 02 Do not clean this white ceramic Before reassembling the surface burners, part with an emery board push down gently on each of the white ceramic, electrodes to make sure they are pressed against the burners bases. NOTE Do not attempt to remove the electrode from the cooktop. Care and cleaning of the cooktop 18 English NA5300R_DG68-01132A-01_EN+MES+CFR.indb 18 2020-06-04 10:20:04
![](/manual_guide/products/samsung-na36r5310fsaa-user-manual-6e93e2d/18.png)