Samsung NA36N9755TM/AA Installation Guide - Page 3
NA30N9755T, NA36N9755T
![]() |
View all Samsung NA36N9755TM/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Location requirements and electrical requirements • To ensure cooktop base clearance, cabinet side walls need to be wider than cutout. • If cabinet has a drawer, allow 39/16" minimum clearance between countertop and top of drawer. • A 120-Volt, 60-Hz, AC, approved electrical service with 20-amp circuit breaker or time- delay fuse is required. 7/16" (11.1 mm) 13" MAX. (330 mm) 30" MIN. (762 mm) 18" MIN. (457 mm) 12" MIN. (304.8 mm) 27/8" MIN. (73 mm) 12" MIN. (304.8 mm) 30" - NA30N9755T* 39/16" (90.5 mm) 13" MAX. (330 mm) 30" MIN. (762 mm) 18" MIN. (457 mm) 33/8" MIN. (85.7mm) 12" (304.8 mm) 36" - NA36N9755T* 12" (304.8 mm) DRAWER Electrical outlet 12" (30.5cm) minimum below countertop Installation over built-in oven 5" To Center of 2" Dia. Hole From Countertop See built-in oven installation for complete installation instructions. 90° Elbow Cabinet Sides 2" Dia. Hole (207/8" from front of countertop to hole Center View from Front of Cooktop Utility locations and dimensions Front of unit Front of cooktop Power cord 393/8" (100 cm) long 3/8"-18NPT male gas inlet Chassis 11/4" (3.2 cm) 115/16" (5 cm) * Gas inlet protrudes 19/16" (4 cm) from bottom. 3 English Quick-Guide_NA9300K_AA_DG68-01094A-01_EN+MES+CFR.indb 3 2018-07-31 4:18:33
![](/manual_guide/products/samsung-na36n9755tsaa-installation-guide-1d4d93f/3.png)