Samsung NA36N9755TS/AA User Manual - Page 12
What’s included, Using the cooktop burners, Ignition
View all Samsung NA36N9755TS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using the cooktop burners What's included Surface burner grates (3) * Surface burners and caps (5) * Cast-iron griddle (1) * Wok grate (1) * NOTE If you need an accessory marked with an asterisk (*), you can buy it from the Samsung Contact Center (1-800-726-7864). 12 English NA36N9755TM_DG68-01090A-02_EN+MES+CFR.indb 12 Using the cooktop burners Ignition CAUTION The knob LED indicates if a burner knob has been turned on. It does not indicate if the burner flame is on. Check for an actual flame, whether the knob LED is on or off. Make sure all cooktop burners are properly installed. To light a burner: 1. Push in the control knob, and then turn it 2 to the Lite position. The knob LED turns on and you will hear a "clicking" sound 1 indicating the electronic ignition system is working properly. 2. After the cooktop burner lights, turn the control knob to shift it out of the Lite position and turn off the electronic ignition system. 3. Turn the control knob to adjust the flame level. NOTE The dual valve located to the center controls the inner/outer flame of the dual burner [Center]. When the inner / outer flame is on the HI position, the flame size gets smaller from the outside when turning the knob from HI to LO. To control the inner flame, push and turn the knob once again at the position where it starts to control inner flame. Manual ignition If there is a power failure, you can ignite the burner manually. Use caution when doing this. 1. Hold a long gas grill lighter to the cooktop burner you want to light. 2. Push in the control knob for that burner, and then turn it to the Lite position. Turn on the grill lighter to ignite the burner. 3. After the burner is lit, turn the control knob to adjust the flame level. 2018-08-29 4:22:22