Samsung NP-NF310 User Manual Xp/windows7 Ver.1.2 (English) - Page 61
Configure, > Power Management, Allow, this device to bring the computer out of standby, Disable
UPC - 036725732766
View all Samsung NP-NF310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Wired Network 3 Click Configure > Power Management tab. Select Allow this device to bring the computer out of standby, then click OK. Restart the system. - If the system wake up from Sleep mode even though there is no received signal, use the system after disabling the function. - The LAN LED may not be turned off if System is shutdown without disabling the WOL option. - Connecting a wired LAN while using a wireless LAN may not activate the function. Set the Wireless LAN to Disable to use the function. - feature may not work while using Hybrid power saving feature. For Windows 7, Wake On LAN is not supported Ping. Chapter 2 Using the computer 60 When connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN. This happens because when the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps. When system is running on battery, some time it takes about 20sec after inserting LAN cable to be able to connect to internet. This symptom happen as a result of power saving feature to reduce battery consumption. When system is running on battery, the Wired LAN speed is decreased automatically to reduce battery consumption. In such case, a 1Gbps /100Mbps LAN would function at 100Mbps/10Mbps speed.