Samsung NP-Q1-V004 Quick Guide (easy Manual) (ver.1.0) (English) - Page 184
Start > Control Panel > Network and Internet > Network and Shar
View all Samsung NP-Q1-V004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Even if the network provides DHCP, the server may not allocate an IP address to the client properly, and the client station cannot connect to the network. Q I cannot connect to the AP. ► Check the Computer Settings A1 Verify whether the wireless LAN function of the computer is on by performing the following. If the wireless LAN function is off, turn it on. ● For Windows Vista, verify that the wireless network connection has been set to Enable in Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. If the wireless LAN is set to Do Not Use, right-click and select Use. ● Check if the wireless LAN is turned on. A2 Verify whether the same network key (encryption key) has been entered for both the AP and the computer. The network key is an encryption key for encrypting the data transmitted between the AP and the computer. It is recommended setting the network key manually. ► Check the AP Settings For the AP settings, refer to the User Guide provided by the AP manufacturer. A3 Verify whether the environment is suitable for using a wireless LAN. The use of a wireless LAN may be restricted according to the environment and distance. Obstacles such as walls or doors affect the use of a wireless LAN. Install the AP in a high and open space, 50cm from the wall and far removed from any other radio signal sources. A4 Verify whether the AP is operating properly. ● When the AP is not operating normally, turn off the AP, wait a short while, and turn it on again. 184