Samsung NP-RF511 User Manual Xp/vista/windows7 Ver.1.8 (English) - Page 55
Connecting through the HDMI port Optional - hdmi input
UPC - 036725732971
View all Samsung NP-RF511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Connecting an External Display Device Chapter 2. Using the computer 54 Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 Connect the HDMI cable to the HDMI port of the TV. External Monitor TV Projector 2 Press the + key combination once. Then the Easy Display Manager screen appears where you can select a display device. Since pressing the key while holding down the key changes the selection, select a display device. HDMI LCD + HDMI Clone LCD + HDMI DualView • This is only supported for models that support a TV output port (HDMI). • When a TV provides more than one HDMI port, connect the computer to the DVI IN port. • When connecting the computer to a TV, switch the external input mode of the TV to HDMI. • External Monitor / TV is not supported in the DOS Command Prompt window. • If the screen is not switched even if you press the + key combination, you have to install the Easy Display Manager program. • Simultaneous output to LCD+CRT+HDMI is not supported. However, the 3D model supports simultaneous output to LCD+CRT+HDMI. 3D mode is available in either LCD or HDMI single screen. 3D mode may not work depending on the 3D external display device connected through HDMI or the software environment.