Samsung NP355E5C User Manual Windows 7 User Manual Ver.1.2 (English) - Page 67
Installing the TPM program, Security > TPM Configuration > Change TPM, Status - recovery
View all Samsung NP355E5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Using the TPM Security Device (Optional) Chapter 3. Using the computer 66 5 When the system reboots, press the corresponding key(s) by following the onscreen instructions. 6 When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. 7 Select the Security > TPM Configuration > Change TPM Status item and set the item to Enable and Activate. Aptio Setup Utility Security TPM Configuration TPM Support Change TPM Status Security Chip State [Enabled] [No Change] Disabled and Deactivated No Change Clear Enable and Activate Disable and Deactivate Installing the TPM program You can install the TPM program as follows. Install the program according to the procedures below. This program is only provided for models with Recovery and the TPM function. 1 Run Recovery and click on System Software. 2 Click on System Software Installation. 3 The SW Update program will be launched. Select TPM Host SW and click Install Now. 8 Press the F10 key to save the changes. 9 When the system reboots, press the corresponding key(s) by following the onscreen instructions. 10 Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program. If the system software media is supplied with the product, you can install the program by using the system software media (only when supplied.) 4 After the installation, if you click OK, the computer restarts.