Samsung NQ70M7770DS/AA User Manual - Page 82
Information codes, English, Displayed, Possible cause, Solution
View all Samsung NQ70M7770DS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Troubleshooting Information codes Displayed Code C-d0 C-d1 C-F0 C-F2 C-10 C-20 C-21 Possible cause Solution This code occurs if the control key is short for 1 minute. Clean the buttons and make sure there is no water on/ around them. Turn off the oven and try again. If the problem continues, contact a local Samsung service center. This code occurs if the door lock is mispositioned. This code occurs if communication between the Main and Sub PBA is interrupted. This code occurs if communication between the Main and Touch is interrupted. The cooking sensor is open when the microwave is operating. The cooking sensor is short when the microwave is operating. The oven sensor is open when the oven is operating. Press OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. The oven sensor is short when the oven is operating. This code occurs if the internal temperature rises abnormally high. Displayed Code C-23 C-30 C-31 -dC- C-70 C-72 C-A2 Possible cause Solution The temp probe sensor is short when the oven is operating. The PCB sensor is open when the oven is operating. The PCB sensor is short when the oven is operating. Press OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. This code occurs if the PCB temperature rises abnormally high. Call for service This code appears if the divider is inserted or removed while the oven is operating. Make sure the divider is inserted properly, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. The steam sensor is open when the oven is operating The steam sensor is short when the oven is operating There are drain system-related problems. Press OFF, and then restart the oven. If the problem presists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. If does not solve the problem, call the service. The cooling motor is operating abnormally. Call for service. Troubleshooting 82 English NQ70M7770D_AA_DE68-04447A-03_EN+MES+CFR.indb 82 2018-08-30 12:55:48