Samsung NV51K7770SS/AA Installation Guide - Page 13
Electrical connection, For Double Ovens, WARNING, Electrical Shock Hazard
View all Samsung NV51K7770SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Electrical connection For Double Ovens WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Make sure to ground the oven. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinetconnected ground (green or bare) wire twisted together. A A. UL listed or CSA approved conduit connector 1. Disconnect power. 2. Feed the flexible conduit from the oven through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. 5. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. For Single Ovens WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Connection Options Chart If your home has: 4-wire Go to section: ½" (1.3 cm) 4-Wire Cable from Home Power Supply 3-wire 3-Wire Cable from Home Power Supply ½" (1.3 cm) NOTE If the power connection is plugged in improperly, "bAd LinE" appears on the display. Reconnect the power connection properly, and the message disappears. English 13 Installation instructions Install_NW9000K_DG68-00862A-09_EN.indd 13 2019-11-11 5:36:08