Samsung NX10 This Is The Upgrade Manual For Samsung Nx-10 Camera.(ver. 1.15) (
Samsung NX10 Manual
UPC - 044701013655
View all Samsung NX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung NX10 manual content summary:
- Samsung NX10 | This Is The Upgrade Manual For Samsung Nx-10 Camera.(ver. 1.15) ( - Page 1
settings like ISO, shutter speed, and aperture, are easy to control by using Samsung 20mm & 20-50mm lens with Samsung NX-10 camera. 1) "i-function" button : Press the "ifn" button on the side of lens. 2) Focus(Value) Ring : To control parameter values 3) "i-function" interface : iFn Button + Ring - Samsung NX10 | This Is The Upgrade Manual For Samsung Nx-10 Camera.(ver. 1.15) ( - Page 2
for 1 time.) 8) The upgrading progress bar will be increased, then after finishing it, camera will turn off ※ Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not proceed with the process on your own. Visit a Samsung service centre near you.
Q[043 Ilupzduh Xsjudgh jxlgh +Yhu1 34153,
1. Before upgrading the firmware
● Make sure you use fully charged batteries.
If camera malfunction is caused during a firmware upgrade for the reasons given above, the mainboard
may have to be serviced by a Samsung service centre, which may result in major repair charges.
● Before upgrading the firmware, make sure that you format the memory card on your PC or camera and
then download the necessary firmware file.
● Download the firmware file into the root directory of the memory card.
● Do not operate the camera, remove the batteries, or cut the power while upgrading firmware. Operate the
camera only after the firmware upgrade is complete.
●
If the running firmware version is below 1.05, then you must upgrade firmware version of 1.15.
To use the "i-function", you need to upgrade the firmware version of 1.20 again.
2. Improvement
version of 01.20
● i-function compatibility (20mm & 20-50mm lens)
● AF speed improved
● We added distortion compensate function
● External GPS compatibility
● Other system stabilization
AF speed improved
3. What is "i-function"?
▷
"i-function is that values and parameter settings like ISO, shutter speed, and aperture, are easy to control
by using Samsung 20mm & 20-50mm lens with Samsung NX-10 camera.
1) "i-function" button : Press the "ifn" button on the side of lens.
2) Focus(Value) Ring : To control parameter values
3) "i-function" interface : iFn Button + Ring Control