Samsung NX58K3310SS/AA User Manual - Page 6
Installation safety, Electrical and grounding safety - griddle
View all Samsung NX58K3310SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Important safety information Important safety information Checking for gas leaks • Leak testing of the appliance must be conducted according to the manufacturer's instructions. Do not use a flame to check for gas leaks. Use a brush to spread a soapy water mixture around the area you are checking. If there is a gas leak, you will see small bubbles in the soapy water mixture at the leak point. Electrical and grounding safety WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. • Plug the range into a grounded 3-prong outlet. • Do not remove the ground prong. • Do not use an adapter or an extension cord. • Do not use a damaged power plug, power cord, or loose power outlet. • Do not modify the power plug, power cord, or power outlet in any way. • Do not put a fuse in a neutral or ground circuit. • Use a dedicated 120-volt, 60-Hz, 20-amp, AC electrical circuit with a time-delay fuse or circuit breaker for this range. Do not plug more than one appliance into this circuit. • Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes. • This range must be Earth grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path for the electric current. This range is equipped with a cord having a grounding plug. The plug must be firmly plugged into an outlet that is properly installed and grounded in accordance with the local codes and ordinances. If you are unsure whether your electrical outlet is properly grounded, have it checked by a licensed electrician. • The range is supplied with a 3-pronged grounded plug. This cord must be plugged into a mating, grounded 3-prong outlet that meets all local codes and ordinances. If codes permit the use of a separate ground wire, we recommend that a qualified electrician determine the proper path for this ground wire. • Electrical service to the range must conform to local codes. Barring local codes, it should meet the latest ANSI/NFPA No. 70 - Latest Revision (for the U.S.) or the Canadian Electrical Code CSA C22.1 - Latest Revisions. • It is the personal responsibility of the range owner to provide the correct electrical service for this range. Installation safety WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, observe the following precautions. • Have your range installed and properly grounded by a qualified installer, in accordance with the installation instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians. • Do not attempt to service, modify, or replace your range or any part of your range unless it is specifically recommended in this manual. All other service should be referred to a qualified technician. • Always use new flexible connectors when installing a gas appliance. Do not use old flexible connectors. • Make sure the anti-tip device is properly installed on the range. See the installation instructions for more information. • Due to the size and weight of the range, have two or more people move the range. • Remove all tape and packaging materials. • Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and griddles are heavy. Use caution when handling them. • Make sure no parts came loose during shipping. Do not install in an area exposed to dripping water or outside weather conditions. 6 English