Samsung NX58K9500WG/AA User Manual - Page 62

English - 62, Problem, Possible cause, Action, START/SET, OFF/CLEAR, Gas Pressure Regulator shut off

Get Samsung NX58K9500WG/AA PDF manuals and user guides View all Samsung NX58K9500WG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Problem The burners do not burn evenly. Very large or yellow surface burner flames. Surface burners light but oven burners do not light. Possible cause Surface burner components and caps are not assembled correctly and level. Surface burners are dirty. Wrong orifice is assembled. The oven door lock is turned on. Gas Pressure Regulator shut off switch is in the 'off position. Action See page 55. Clean surface burner components. (See page 54.) Check the burner orifice size and contact your installer if you have the wrong orifice (LP gas instead of natural gas or natural gas instead of LP gas). The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. Call a qualified service technician. Oven Problem The oven control beeps and displays an information code. Very large or yellow oven burner flames. Oven temperature is too hot or cold. Possible cause Action You have a function information code. See the "Information codes" chart on page 67. Press the OFF/CLEAR button and restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. The oven burner air adjustment Call for a qualified service shutters need to be adjusted. technician. Gas supply is not properly connected or turned on. See the Installation Instructions that came with your range. Wrong orifice is assembled. Check the burner orifice size and contact your installer if you have the wrong orifice (LP gas instead of natural gas or natural gas instead of LP gas). Oven thermostat needs adjustment. See page 45. English - 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
English - 62
Problem
Possible cause
Action
The burners do not burn
evenly.
Surface burner components and
caps are not assembled correctly
and level.
See page 55.
Surface burners are dirty.
Clean surface burner
components. (See page 54.)
Very large or yellow
surface burner flames.
Wrong orifice is assembled.
Check the burner orifice size and
contact your installer if you have
the wrong orifice (LP gas instead
of natural gas or natural gas
instead of LP gas).
Surface burners light
but oven burners do not
light.
The oven door lock is turned on.
The display will show the Lock
icon. Hold the oven door open
and press the
START/SET
button
for 3 seconds. The oven will beep
and the Lock icon will turn off.
Gas Pressure Regulator shut off
switch is in the ‘off position.
Call a qualified service technician.
Oven
Problem
Possible cause
Action
The oven control
beeps and displays an
information code.
You have a function information
code. See the "Information codes"
chart on page 67.
Press the
OFF/CLEAR
button and
restart the oven. If the problem
persists, disconnect all power to
the range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
Very large or yellow oven
burner flames.
The oven burner air adjustment
shutters need to be adjusted.
Call for a qualified service
technician.
Gas supply is not properly
connected or turned on.
See the Installation Instructions
that came with your range.
Wrong orifice is assembled.
Check the burner orifice size and
contact your installer if you have
the wrong orifice (LP gas instead
of natural gas or natural gas
instead of LP gas).
Oven temperature is too
hot or cold.
Oven thermostat needs
adjustment.
See page 45.