Samsung NX58R4311SS/AA Installation Guide - Page 27
OVEN OFF, Broil Hi/Lo, START/SET, 350°, 150°
View all Samsung NX58R4311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To start the bake burners: 1. Press the Bake pad. The oven will beep every time a pad is pressed. The default temperature 350° will blink on the display. If the default temperature is the desired cooking temperature, skip to Step 2. 2. Press the number pads to change the temperature setting to the desired temperature setting. The selected cooking temperature will blink on the display. To start the broil burners: 3. Press the START/SET pad. The display will show a blinking •, along with 150° and Bake until the oven reaches that temperature; then the display will just show the actual oven temperature. The oven will automatically light after 30~90 seconds and start preheating. When the oven reaches the desired baking temperature, it will beep 6 times. 4. Press the OVEN OFF pad to shut off the oven. The display will show the time of day. NOTE The oven burners require electrical power to operate. They cannot be lit manually with a match, so the oven cannot be used during power outages. To check ignition of the broil burner, touch the Broil Hi/Lo Pad and then the START/SET pad. After 30~90 seconds, the broil burner will ignite. Installation instructions Install_NX58R4311SS_AA_DG68-01153A-02_EN+MES+CFR.indb 27 English 27 2020-06-16 �� 8:30:21