Samsung NX58R9421SG/AA Installation Guide - Page 7
Installation safety, codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition.
View all Samsung NX58R9421SG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Important safety information Installation safety WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. • Have your range installed and properly grounded by a qualified installer, in accordance with the installation instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians. • Do not attempt to service, modify, or replace your range or any part of your range unless it is specifically recommended in this manual. All other service should be referred to a qualified technician. • Always use new flexible connectors when installing a gas appliance. Do not use old flexible connectors. • Make sure the anti-tip device is properly installed on the range. See the installation instructions for more information. • Due to the size and weight of the range, have two or more people move the range. • Remove all tape and packaging materials. • Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and griddles are heavy. Use caution when handling them. • Make sure no parts came loose during shipping. • Make sure your range is correctly installed and adjusted by a qualified service technician or installer for the type of gas (natural or LP) you will use. For your range to utilize LP gas, the installer must replace the 5 surface burner orifices and 2 oven orifices with the provided LP orifice set, and reverse the GPR adapter. These adjustments must be made by a qualified service technician in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. The qualified agency performing this work assumes the gas conversion responsibility. • Installation of this range must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with local codes where applicable. This range has been design-certified by ETL according to ANSI Z21.1, latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest edition. Install_NX58M9420SS_DG68-00906A-03_EN+MES+CFR.indb 7 English 7 10/24/2018 12:51:26 PM