Samsung PL-50D4H User Manual (user Manual) (ver.1.0) (English) - Page 77
In some cases, abnormal signals such as stripes might appear on the screen when the PC power
View all Samsung PL-50D4H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Notes: Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal IBM PC / AT Compatible Resolution (Dot X Line) 720 X 400 640 X 480 800 X 600 1024 X 768 1280 X 1024 Vertical Frequency(Hz) 70.087 59.940 72.809 75.000 85.008 56.250 60.317 72.188 75.000 85.061 60.004 70.069 75.029 84.997 60.020 Horizontal Frequency(KHz) 31.469 31.469 37.861 37.5 43.269 35.156 37.897 48.077 46.875 53.674 48.363 56.476 60.023 68.677 63.981 Vertical Polarity P N N N N N/P P P P P N N P P P Horizontal Polarity N N N N N N/P P P P P N N P P P • The interlace mode is not supported. • The PDP operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input. • "1280 x 1024" is not available in DVI mode. Notes: • When this PDP is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a PDP. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHZ (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected. • Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear). 77