Samsung PL210 User Manual (user Manual) (ver.1.0) (English) - Page 45

Shooting in the dark Option Description Red-eye Fix*: • The flash fires twice when the subject or background is dark. The subject should not move until the flash fires a second time. • The camera corrects red-eyes through its advanced software analysis. Slow Sync: • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning ( ) when you are shooting in low light. Fill in: • The flash always fires. • The camera adjusts light intensity automatically. Red-eye*: • The flash fires when the subject or background is dark. • The camera reduces red-eyes. Auto: The flash fires automatically when the subject or background is dark. The options may differ depending on the shooting mode. • Flash options are not available if you set burst options or select Self-Shot or Blink Detection. • Make sure that your subjects are within the recommended distance from the flash. (p. 102) • If light from the flash is relected or there is a large amount of dust in the air, tiny spots may appear in your photo. Adjusting the ISO speed The ISO speed is the measure of a film's sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash. 1 In Shooting mode, press [ ]. 2 Select Shooting → ISO → an option. • Select to use an appropriate ISO speed based on the brightness of the subject and lighting. • The higher ISO speed you select, the more image noise you may get. • When you select Motion Capture, the camera sets the ISO speed to Auto. Shooting options 44