Samsung PN42A400C2D User Manual (user Manual) (ver.1.0) (English, French, Span - Page 52
Upgrading the Software, SW Upgrade - firmware
View all Samsung PN42A400C2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Upgrading the Software Samsung may offer upgrades for your TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the rear of the TV. TV Rear Panel ($-)). USB Drive 2 Press the MENU button to display the menu. T V Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. ▲ More Energy Saving : Off ► 3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button. SW Upgrade ► 4 Press the ▲ or ▼ button to select USB, then press the ENTER button. The message Scanning for USB... It may take up to 30 seconds is displayed. Move Enter Return T V SW Upgrade USB ► 5 If the firmware on the USB is properly recognized, the message Upgrade version xxxx to version xxxx The system would be reset after upgrade. is displayed. Press the ◄ or ► button to select Yes, then press the ENTER button. The upgrade starts. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. Enter Return SW Upgrade Scanning for USB... It may take up to 30 seconds SW Upgrade Upgrade version XXXX to version XXXX? The system would be reset after upgrade. Yes No English - 52