Samsung PN50A450P1DXZA User Manual (ENGLISH) - Page 45
Setting up the TV with your PC, Adjusting the Screen Quality
View all Samsung PN50A450P1DXZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input mark means that this mode is supported. ➢ • For the PN42A450P1D, PC text quality is optimum in VESA mode (1024 x 768@60Hz). • For the PN50A450P1D, PC text quality is optimum in VESA mode (1360 x 768@60Hz). (Three pixels on left, right, top and bottom will be grayed out at the resolution setting of 1360x768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the standard resolution and the PDP panel.) • When this TV is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or TV panel to enter a VIDEO mode. Also, make sure that the PC is connected. Setting up the TV with your PC Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. How to Auto Adjust 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. 2 Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER button. The message Auto Adjustment in progress. Please wait. appears on the screen and the picture adjustments are automatically activated. Press the EXIT button to exit. ➢ This function does not work in DVI-Digital mode. T V Picture Mode : Standard ► Cell Light 7 Contrast 95 Brightness 45 Sharpness 50 Auto Adjustment Screen ► ▼ More Move Enter Return i Auto Adjustment in progress. Please wait. Easy Setting 1 Press the TOOLS button on the remote control. 2 Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER button. Adjusting the Screen Quality The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen. ➢ Preset : Press the SOURCE button to select PC mode. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Press the ▲ or ▼ button to select Screen, then press the ENTER button. Tools Anynet+ (HDMI-CEC) Picture Mode : Sound Mode : Sleep Timer : Auto Adjustment Standard Speech Off Move Enter Exit T V Screen Image Lock ► Position ► Image Reset Resolution : 1024x768 @60Hz Move Enter Return English - 45 Continued...