Samsung PN50A760T1F Quick Guide (ENGLISH) - Page 8

Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a little while before you see a full picture. Viewing the Menus 1 With the power on, press the MENU button. The main menu appears on the screen. The menu's left side has icons: Picture, Sound, Channel, Setup, Input, Application. 2 P ress the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon's sub-menu. ➢ To move to a lower menu, turn the wheel clockwise when the menu Display is on the screen. To move to a higher menu, turn the wheel counterclockwise. 3 Press the EXIT button to exit. ➢ It takes about one minute until the on-screen menu disappears. Picture Mode Cell Light Contrast Brightness Sharpness Color Tint (G/R) Detailed Settings : Standard : 7 : 95 : 45 : 50 : 50 : G50/R50 Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Channel Antenna : Air ► Auto Program Clear Scrambled Channel Channel List Fine Tune Signal Strength 2 Press the ENTER button to select Antenna. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the EXIT button to exit. Channel Antenna Auto Program : AAirir Cable Clear Scrambled Channel Channel List Fine Tune Signal Strength Storing Channels in Memory (Automatic Method) 1 Press the MENU button to display the menu. P ress the ▲ or ▼ button to select Channel, then press the ENTER button. Channel Antenna : Air Auto Program ► Clear Scrambled Channel Channel List Fine Tune Signal Strength RETURN W.LINK CH LIST EXIT INFO TOOLS Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the RETURN CH or CH button to scan through the channels. This eliminates the need to change channels by eW.nLINKteringEXITthe channel digits. There are three steps for mCHLeISTmorIiNFzO ing channels: selecting a broadcast source, memoriziTOnOLSg the channels (automatic) and adding and deleting channels (Channel Lists). 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. Auto Program Select the Antenna source to memorize. Air Start Cable Start Auto Start Move Enter Return English -