Samsung PN50B450 Quick Guide (ENGLISH) - Page 5
Connecting a VCR, Connecting a Camcorder
UPC - 036725229303
View all Samsung PN50B450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connecting a Camcorder Using an HDMI Cable Camcorder TV Rear Panel TV Side Panel 1 Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the camcorder. 1 HDMI Cable (Not supplied) or ➢ Each Camcorder has a different back panel configuration. Connecting a VCR Using a Video Cable TV Rear Panel TV Side Panel 1 Unplug the cable or antenna from the back of the TV. VCR Rear Panel 4 3 5 Audio Cable (Not supplied) Video Cable (Not supplied) 2 Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3 Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4 Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV. 5 Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV. 6 Press the SOURCE button on the remote control until you see the VCR signal (see "To Select the Source" on page 10). ➢ If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the "R" jack. If your VCR is stereo, you must connect two cables. ➢ Each VCR has a different back panel configuration. ➢ When connecting a VCR, match the color of the connection terminal to the cable. ➢ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). English -