Samsung PN50C490B3D Quick Guide (easy Manual) (ver.1.0) (English) - Page 2

Step 6: Remote Control Remote Control Buttons and Functions ✎✎This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons. Turns the TV on and off. Displays and selects the available video sources. Changing Channels and Adjusting the Volume Adjust the volume by pressing the Volume button on the remote. Change the channels by pressing the Channel button on the remote. ✎✎If your TV is attached to a cable or satellite box, change the channel using the box's remote. ✎✎You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button. Press to directly access channels. Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel "54-3", press "54", then press "-" and "3". Adjusts the volume. Brings up the OSD. Displays Media Play. Quickly select frequently used functions. Returns to the previous menu. Buttons used in the Channel list, Media Play menu, etc. Use these buttons in Media Play and Anynet+ modes (�: Controls recording for Samsung recorders that have the Anynet+ feature). A BC D SLEEP P.MODE P.SIZE Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Displays the channel list on the screen. Displays Favorite Channel Lists on the screen. Displays information on the TV screen. Selects the on-screen menu items and changes the values seen on the menu. Exits the menu. MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). SLEEP: Automatically shuts off the TV at a preset time. : Sets the 3D mode. P.MODE: Press to select the picture mode. P.SIZE: Selects the picture size. CC: Controls the caption decoder. Selecting a Source To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/DVD player, a cable/satellite box, antenna or a cable TV A BC D S.MODE SLEEP input. Sources can be connected to your TV through the HDMI, DVI, Component, Composite, or D-sub P.MODE P.SIZE connections, or through the Antenna or Cable In connections. To view the signal from a source connected to the HDMI, DVI, Component, Composite, or D-sub jack, press the SOURCE button on your remote. Each time you press the SOURCE button, you change to a different source. Viewing the On Screen Menus To view the On Screen Menus, follow these steps: 1. With the power on, press the MENU button on your remote. The main menu appears. The menu's left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application and Support. 2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the ENTERE button. 3. When done using the menu, press the EXIT button on your remote to exit. A BC D A BC D S.MODE SLEEP Changing the Screen Size S.MODE P.MODE SLEEP P.SIZE P.MODE P.SIZE Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P.SIZE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.SIZE button, you change the size of the picture on the screen. The following sizes are available: 16:9 Wide screen 4:3 Standard screen Wide Fit Changing the Picture Mode Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions. To change the Picture mode, press the P.MODE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.MODE button, you change the mode of the picture on the screen. The Picture Modes are listed and described in the table below: Mode Dynamic Standard Movie Description Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room. For a bright, detailed picture in a normally lit room. For a studio quality cinema picture in a dimly lit or dark room. To change the Picture Mode, follow these steps: 1. Turn on your TV, press the TOOLS button on your remote. The Tools menu appears. 2. Using the ▲ or ▼ on your remote, select Picture Mode. 3. On the Picture Mode menu, use the ◄ or ► button on your remote to select the Picture Mode you want. 4. Press the EXIT button to exit the menu. Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV, press the MENU button on your remote, then select Setup → Time. 2. Select Clock Mode, and then press the ENTERE button. 3. Choose Auto or Manual. xx If you select Auto, the current time will be set automatically using the time from a digital channel. xx If you select Manual, you can set the Month, Day, Year, Hour, Minute and am/pm directly by pressing up, down, left and right arrow button on your remote. 4. Press the RETURN button on your remote when done. Zoom 1 Zoom 2 Screen Fit ✎✎Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. Connecting a USB Device for Media Play You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. For Media Play operating instructions, please see your Owner's Manual. MediaPlay Videos 1. Turn on your TV. SUM Change Device View Devices E Enter R Return 2. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select Media Play.