Samsung PN50C680G5F User Manual (user Manual) (ver.1.0) (English) - Page 20
Picture Reset OK / Cancel, Auto Adjustment, Screen, Setting up the TV with Your PC - software
UPC - 036725234505
View all Samsung PN50C680G5F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Basic Features Supported formats and operating specifications for Standard HDMI 3D ✎✎The 3D formats indicated below are recommended by the HDMI association and must be supported. Source signal format 1920x1080p@24Hz x 2 1280x720p@60Hz x 2 Standard HDMI 1.4 3D 1920x2205p@24Hz 1280x1470p@60Hz The mode is automatically switched to 3D in one of the source signal formats above. Before using 3D function... ✎✎NOTE xx You may notice a small amount of screen flickering when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off. xx 3D mode is automatically disabled in following cases: when changing a channel or the input source, or accessing Media Play. xx Some Picture functions are disabled in 3D mode. xx PIP is not supported in 3D mode. xx 3D Active Glasses from other manufacturers may not be supported. xx When the TV is initially powered on, it may take some time until the 3D display is optimized. xx The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. xx Photos of Media Play are shown in "2D → 3D" mode only. xx If you lie on your side while watching TV with 3D active glasses, the picture may look dark or may not be visible. xx Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. -- Otherwise, you may not be able to enjoy proper 3D effects. xx The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer's eyes on a level with the screen. Picture Reset (OK / Cancel) Resets your current picture mode to its default settings. ¦¦ Setting up the TV with Your PC Set the input source to PC. OO MENUm → Picture → ENTERE Auto Adjustment t Adjust frequency values/positions and fine tune the settings automatically. ✎✎Not available when connecting with an HDMI/DVI cable. Screen ■■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen. ■■ Position: Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. ■■ Image Reset: Resets the image to default settings. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on "Control Panel" on the Windows start menu. 2. Click on "Appearance and Themes" in the "Control Panel" window and a display dialog-box will appear. 3. Click on "Display" and a display dialog box will appear. 4. Navigate to the "Settings" tab on the display dialog-box. yy The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] yy If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box. 20 English