Samsung R7040 User Manual - Page 8

2-6 Safety information CAUTION Before use • If a brush or brush cover is not assembled correctly, scratches may occur on the floor, or product malfunction may occur. • Before operating the POWERbot, remove the objects which could break such as a frame, mirror, and porcelain items so that the POWERbot works without interruption. • Insert the dustbin before using the POWERbot. • For proper automatic recharging, do the following: --Always turn on the power of the docking station. --Install the docking station where the POWERbot can find it easily. --Do not leave any object in front of the docking station. • When installing the docking station, do not leave the cord on the floor where the POWERbot can run over it. • Do not use POWERbot on black colored floors. --The POWERbot may not be able to operate normally. • Do not place any objects within 1.6 ft (0.5 m) of either side of the docking station or within 3.3 ft (1 m) of the front of the docking station. • Make sure the docking station's charging contact is not damaged and is free of foreign matter. • Do not install the docking station in an area with a dark floor. --If the floor around the docking station is dark, recharging is hindered. • Move any obstacles that may disturb POWERbot's movement (such as a children's indoor swing or slide) before cleaning. • Do not use the POWERbot in a place which is narrower than its turning radius (1.6 ft/0.5 m or less). • To clean all areas of your house, open all rooms and attach the boundary markers to places where the POWERbot could get damaged such as a front door, veranda, bathroom, or stairs. • For areas with low clearance where the POWERbot may get stuck, attach the boundary markers to prevent the POWERbot from getting in. In use • Using the POWERbot on thick carpet may damage both the POWERbot and the carpet. --The POWERbot cannot pass over carpet that is thicker than 0.4 in (1 cm). • Do not use the POWERbot on tables or other high surfaces. --There is a risk of damage if it falls. • The POWERbot may bump into chair or desk legs. Move them out of the away for faster, more efficient cleaning. • When the POWERbot is operating, do not lift it up or carry it to another area. • Do not hold the POWERbot by its driving wheels when carrying it to another area. • Do not put any objects on top of the POWERbot and camera since this may cause the POWERbot to malfunction. • Remove any large pieces of paper or plastic bags from the area to be cleaned before using the POWERbot since they may block the POWERbot's intake. • Do not aim the red pointer directly at people or animals. • Do not lie down near the POWERBOT when it is running. --Your hair may be caught in the brush, resulting in physical injury. Cleaning and maintenance • To prevent any damage to the POWERbot: --Do not clean the POWERbot by spraying water directly onto it or using benzene, thinner, acetone or alcohol to clean it. • Do not disassemble or try to repair the POWERbot yourself. Repairs should only be done by a certified repairman. • Always keep the obstacle sensor, cliff sensor, and camera clean. --If foreign matter accumulates, the sensors may malfunction. English-8