Samsung RB10FSR4ESR User Manual - Page 29

15.Switch the position of Bottom hinge and Leg. (Right -> Left) Assemble the Hinge Low after putting the Freezer Door in the middle hinge. • Disassemble the Guide auto close and the Shafthinge. • Assemble the Shaft-hinge and the Guide auto close like this on picture. 17.Switch the Wire-Door Direction to opposite side like the Picture. Shaft-hinge Hinge Low 18.Use 11 mm wrench to separate the Top hinge shaft. Flip the Top hinge and reattach the Top hinge shaft. 02 OPERATING 16.Put the Cap-Control out from the Cover Control like the picture (1). Remove the Screw and disassemble the Cover control (2), Switch the Wire door (3) direction to opposite side on Fridge Door (Door Display type only). Assemble the Cover-Control with Screw like a Picture (4). (1) (1-1) (1-2) 18-1.Use 11 mm wrench to separate the Top hinge shaft and nut. Flip the Top hinge and reattach the Top hinge shaft and nut. (Only for RB33N*, RB34N*, RL33N* model) Tighten the shaft (and nut) as much as possible using a wrench. 19.Insert the Top hinge to make the hole a little bigger and then put out the Top hinge to assemble the Fridge door. (1-3) (1-4) (2) (1-5) (3) (4) Assembly steps 1. Assemble the Top hinge on the Fridge door. 2. Assemble the Middle hinge on the Fridge door. 3. Insert the Top Hinge on the Cabinet. 4. Assemble the screw. operating _29