Samsung RB193KASW User Manual (user Manual) (ver.1.0) (English) - Page 13

REVERSING THE DOOR SWING, Read these instructions completely and carefully

Page 13 highlights

REVERSING THE DOOR SWING Read these instructions completely and carefully - IMPORTANT NOTES Unplug the refrigerator from its electrical outlet. Warning Empty all door guards / racks. 1. If you want to change the door direction, call 1-800-SAMSUNG. 2. Read the instructions carefully before starting. 3. Handle parts carefully to avoid scratching paint. 4. Set screws down by their related parts to avoid using them in the wrong places. 5. Provide a non-scratching work surface for the doors. (ex : blanket) 6. During door reversing, refrigerator should not be stained with oil. - TOOLS YOU WILL NEED - ADDITIONAL PARTS Philips head screwdriver 7/16" inch wrench Middle hinge - DISASSEMBLY OF THE FRIDGE DOOR 1. After removing the screw, disassemble the Upper Right Hinge Cover. Screw Compression Compression Fitting Nut 3. With the 7/16 inch wrench, remove the four bolts that hold the top of the refrigerator. Hinge Cover 2. Disconnect electric wire on the top of the refrigerator. 4. Separate Hinge from electric wire as shown below. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

13
REVERSING THE DOOR SWING
Read these instructions completely and carefully
- IMPORTANT NOTES
- TOOLS YOU WILL NEED
- DISASSEMBLY OF THE FRIDGE DOOR
Unplug the refrigerator from its electrical outlet.
Empty all door guards / racks.
1. After removing the screw, disassemble the Upper
Right Hinge Cover.
3. With the 7/16 inch wrench, remove the four
bolts that hold the top of the refrigerator.
2. Disconnect electric wire on the top of the refrigerator.
Warning
1. If you want to change the door direction, call 1-800-SAMSUNG.
2. Read the instructions carefully before starting.
3. Handle parts carefully to avoid scratching paint.
4. Set screws down by their related parts to avoid using them in the wrong places.
5. Provide a non-scratching work surface for the doors. (ex : blanket)
6. During door reversing, refrigerator should not be stained with oil.
Philips head screwdriver
7/16" inch wrench
- ADDITIONAL PARTS
Middle hinge
Screw
Compression
Fitting
Compression
Nut
Hinge Cover
4. Separate Hinge from electric wire as shown
below.