Samsung RF217ACPN User Manual (user Manual) (ver.0.1) (English) - Page 9
Setting up your French Door Refrigerator, GETTING READY TO INSTALL THE REFRIGERATOR - dimensions
UPC - 036725568105
View all Samsung RF217ACPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
01 SETTING UP Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the Refrigerator • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with level (or nearly level) flooring. • A location with enough space for the Refrigerator doors to open easily. • Allow sufficient space to the right, left, back and top for air circulation. If the Refrigerator does not have enough space, the internal cooling system may not work properly. • Please ensure that appliance can be moved freely in the event of maintenance & service. First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of Samsung French Door Refrigerator. Model Dimension Depth (inch/mm) Height Width (A) without door (B) with door (C) without hinge (D) with hinge (E) RF195** RF215** RF197** RF217** 31⅞ / 810 24⅜ / 620 26⅜ / 671 30⅛ / 764 32⅞ / 836 68⅞ / 1750 68⅞ / 1750 70 / 1778 70 / 1778 A B C D E • A llow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • If you install the Refrigerator where is below 50ºF (10ºC), it may not function optimally. • Do not locate the refrigerator where the wet condition. When moving your refrigerator CAUTION To prevent floor damage, be sure the front adjusting legs are in the up position(above the floor). Refer to 'Adjusting the doors' (on page 15). FLOORING Flat-blade screwdriver(-) For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 223lbs(106kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight out and return it to position by pushing it straight in. Control Lever setting up _9