Samsung RF24FSEDBSR User Manual Ver.0.4 (English, French, Spanish) - Page 20

in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below. Fahrenheit : 37°F ➞ 36°F ➞ 35°F ➞ 34°F ➞ 44°F ➞ 43°F ➞ 42°F ➞ 41°F ➞ 40°F ➞ 39°F ➞ 38°F ➞ 37°F. Centigrade : 3°C ➞ 2°C ➞ 1°C ➞ 7°C ➞ 6°C ➞ 5°C ➞ 4°C ➞ 3°C. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display. -- The temperature of the Freezer or Fridge may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside. -- A rise in temperature may cause the digital display to blink. Once the Freezer and Fridge temperature return to their normal set temperatures, the blinking will stop. -- If the blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in. -- If there is a communication error between the Display and Main Controller, the Convertible Display light may blink. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center. USING THE COLD WATER DISPENSER Push the appropriate ice type button to select what you want dispensed. NO ICE Select this if you want to turn ice maker off Using the ice lever ( 1 ) Push the Ice lever dispenser ( 1 ) gently with your glass. Ice will be released from the dispenser. 1 You can choose the type of ice by pushing the cubed or crushed 2 button first. Using the Water lever ( 2 ) Push the Water lever dispenser ( 2 ) gently with your glass. Water will be released from the dispenser. If you push the water and Ice lever at about the same time, the dispenser operates only the option you actually selected or pushed first. Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after dispensing ice or water. It comes back automatically. Using the Ice & Water Dispenser together To get Ice and water, push the Ice lever ( 1 ) first for ice, then move your glass down and press the water dispenser lever ( 2 ) for water. Maintaining the Ice Bucket • To clean the ice bin/bucket, wash with a mild detergent, rinse well, and dry thoroughly it. Do not use harsh or abrasive cleaners or solvents. • Ice is made in cubes. When you select "Crushed", the ice maker grinds the ice cubes into crushed ice. • When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced. • The ice cubes generated by the rapid ice making process will look white, which indicates they were generated normally. • As the ice maker in the refrigerator room makes ice cubes even faster, move the ice cubes from the refrigerator ice bin to the freezer ice bin if you need more ice cubes. • If ice doesn't come out, pull out the ice bucket and press the test button located on the right side of ice maker. See the illustration below. • Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket. 20_ operating