Samsung RF24J9960S4 User Manual - Page 40

After dispensing Sparkling water, lift the Sparklingselector lever up. CAUTION Do not hang on the Sparkling-selector lever and do not use excessive force to pull it down or lift it up. Water Dripping Some time after you have dispensed sparkling water, a few drops of sparkling water can escape from the dispenser. The water dripping is not a product defect, but a natural result of mixing CO2 and water. Controlling the Carbonation Level You can change the sparkling water's carbonation level by pressing the Sparkling Level button. Each time you press the Spakling Level button, the carbonation level changes as follows: Medium (Level-2) → Strong (Level-3) → Weak (Level-1) → Medium (Level-2). As you press the button, the small numbers on the right side of the button light up in succession, indicating the level change. The change in carbonation level is applied the next time the refrigerator makes sparkling water. -- If there is previously produced sparkling water inside the Sparkling Water tank, the refrigerator dispenses sparkling water with the previous carbonation level. (Again, changes in the carbonation level do not take effect until the next time the refrigerator makes sparkling water. The change does not affect sparkling water that is already made.) -- While the refrigerator is producing sparkling water, the Sparkling Level icons light up in rotation (Level-1 → Level-2 → Level-3 → Level-1, etc.). If you press the Sparkling Water button again while the carbonation level is being displayed, the carbonation level changes. The change in the carbonation level will take effect the next time the refrigerator makes sparkling water. -- The main number on the left side indicates the sparkling level of the current sparkling water, while the small numbers on the right side indicate the sparkling level for the next process. Even if you change the sparkling level while the refrigerator is producing sparkling water, the change is not applied to the current process but is applied to the next process. The Sparkling Level is set to Level 2 at the factory. If the sparkling water tastes too strong or too weak, change the carbonation level. Level 1 provides a milder carbonation, Level 3 a stronger carbonation. • If there is a power interruption when the refrigerator is making sparkling water, the refrigerator may restart the carbonation process when power returns and put too much carbonation into the water. If this occurs, we recommend throwing out the overly carbonated water and starting the process again. • The lifetime of the CO2 cylinder can vary, depending on the Sparkling Levels you choose. English - 40 DA68-03013A-15.indb 40 2016. 3. 31. �� 11:38