Samsung RF260BEAESG User Manual - Page 14
Changing The Water Filter
View all Samsung RF260BEAESG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CHANGING THE WATER FILTER To reduce risk of water damage to your WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from the use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter. The Filter light turns red to let you know when it is time to change your water filter cartridge. To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. (Red) Changing the filter on time provides you with the freshest, cleanest water from your refrigerator. 1. filter ( 1 ) about 1/4 turn, counter-clockwise. 2. Pull the water filter ( 1 ) from the case filter ( 2 ). 4 5. After removing the old water filter and installing a new reset the indicator by pressing the "Fridge" and "Power Cool" button simultaneously for about 3 seconds. 6. on. For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter. Link : http://www. samsungparts.com 2 1 t To change the water filter more easily, t Sometimes it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard. t When you pull the water filter, a little 2 water can leak from the opening. This is 3 normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it. t To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ). 3. Insert the new filter into the filter case ( 4 ). 4. Push the filter, and then turn it clockwise until it locks. t If you have trouble inserting the water filter because of high water pressure, Removing any residual matter inside the water supply line after installing the water filter. 1. Turn ON the main water supply and supply water to the refrigerator. 2. Run 1 Gal of water through the dispenser until the water runs clear (approx. 6 to 7 minutes). This will clean the water supply system and remove air from the lines. 3. If after pour 1 Gal the water doesn't turn clear is 4. Open the Refrigerator door and make sure there are no water leaks coming from the water filter. Be sure to flush the dispenser system thoroughly, otherwise water may drip fr om the dispenser. This means that there is still air in the line. t The locked symbol should be lined up with the indicator line. 14_operating