Samsung RF260BEAESR User Manual Ver.1.0 (English, French, Spanish) - Page 9

Assemble The Freezer, Drawer, Adjusting The Level, Making Minor Adjustments, Between Doors - review

Get Samsung RF260BEAESR PDF manuals and user guides View all Samsung RF260BEAESR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

01 setting up Assemble the freezer drawer To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order. Adjusting the Level Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. Making minor adjustments between doors Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. Fixed part Adjustment part How to adjust the level 111 Open the freezer drawer and remove the lower basket. 222 Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) The left door is fixed. To make minor adjustments between doors, adjust only the right door. 111 Pull out the freezer drawer ( 1 ), then you can see the lower hinge ( 2 ). 222 Insert the supplied allen wrench (3/16") ( 3 ) into the shaft ( 4 ) of the lower hinge. 333 Please adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counterclockwise ( UP ). When you turn the hex wrench counter- clockwise( ), the door will move up. 2 flat-blade screwdriver(-) Control Lever 3 3 4 Both control levers must be touching the 1 cAuTION floor to avoid possible personal injury or property damage because of tipping. If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. 444 After adjusting the doors, insert the supplied fastener ( 6 ) using a pliers ( 5 ) in the gap between the hinge-grommet ( 7 ) and the lower hinge ( 8 ). The number of fasteners you'll need to insert depends on the gap. 2 fastener are enclosed with the refrigerator. The thickness of each fastener is 0.04". setting up _09 DA68-02601B(EN+ES+FR)-0.0.indb 9 2012.3.29 9:28:40 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
setting up
_09
01 SETTING UP
ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved
the fridge to its final location, assemble parts in
reverse order.
ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can
make final adjustments. Use a level to test if the
refrigerator is level both side to side and back to
front. If the refrigerator is not level, it will not be
possible to get the doors perfectly even, which
may cause moisture condensation and increased
energy bills. Below is an example of how to level
the refrigerator if the left side of the refrigerator is
lower than the right side.
How to adjust the level
Open the freezer drawer and remove the lower
1.
basket.
Insert a flat-blade screwdriver (-) into a notch
2.
on the left control lever, and turn it count
clockwise to level the refrigerator. (You turn the
lever clockwise to lower the refrigerator and
counterclockwise to raise it.)
Both control levers must be touching the
floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever. Instead, refer to the
next page for the best way to make minor
adjustments to the doors.
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember, a leveled refrigerator is necessary
for getting the doors perfectly even. If you need
help, review the previous section on leveling the
refrigerator.
The left door is fixed. To make minor
adjustments between doors, adjust only
the right door.
Pull out the freezer drawer (
1.
1
), then you can
see the lower hinge (
2
).
Insert the supplied allen wrench (3/16”) (
2.
3
)
into the shaft (
4
) of the lower hinge.
Please adjust the height by turning the
3.
hex wrench (
3
) clockwise (
DOWN
) or
counterclockwise (
UP
).
When you turn the hex wrench counter-
clockwise(
), the door will move up.
After adjusting the doors, insert the supplied
4.
fastener (
6
) using a pliers (
5
) in the gap
between the hinge-grommet
(
7
) and the lower
hinge
(
8
). The number of fasteners you’ll need
to insert depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.
CAUTION
flat-blade screwdriver(-)
Control Lever
Adjustment
part
Fixed part
3
1
2
3
4
DA68-02601B(EN+ES+FR)-0.0.indb
9
2012.3.29
9:28:40 AM