Samsung RF263BEAESG User Manual - Page 11
Reattaching The, Refrigerator Doors, Disassemble The Flex Door
View all Samsung RF263BEAESG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
01 SETTING UP 2. Disconnect two connectors ( 2 ) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler. If a red clip is on the coupler, it must be CAUTION removed before removing the tube. 2 Red Clip (1/4") REATTACHING THE REFRIGERATOR DOORS To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 1. The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser. 2. Insert the clip in the top plate and check that it 3 4 3. Pull and remove the hinge lever ( 5 ) . Remove the ground screw ( 6 ) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 7 ). 5 6 7 By placing the 3 screws again ensure that the wires CAUTION are in not to damage the harness. DISASSEMBLE THE FLEX DOOR 1. Take out the upper drawer by lifting it up. 4. Lift the door straight up to remove. 2. Take out the lower basket ( 1 ) by lifting the basket up from the rail system. 5. Remove the screw ( 8 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 9 ) attached to the lower left and right door hinges with an allen wrench (3/16"). Remove the lower left and right door hinges ( 10 ). 1 3. Press the fixing hook of rail system. 10 8 9 Allen wrench 11_setting up DA68-02601A(EN+FR+ES)-0.2.indb 8 2012.3.31 9:49:38 AM