Samsung RF263BEAESP User Manual Ver.1.0 (English, French, Spanish) - Page 13
Changing The Water Filter
View all Samsung RF263BEAESP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
02 operating ( 8 ) Filter Water filter usage This icon will light up when you need to change the filter. After you use about 300 gallons of water, the filter indicator lights up. (about 6 months). After you install the new water filter, reset the filter indicator by touching the Alarm/hold 3 sec for Filter Reset button. •• If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged. •• Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. Cooling Off Mode Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. To start Cooling Off mode, touch and hold the Energy Saver button and the Freezer button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF. To cancel Cooling Off mode, touch and hold the Energy Saver and the Freezer buttons again for 5 seconds. Changing the water filter To reduce risk of water damage to your WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter. The Filter light turns red to let you know when it is time to change your water filter cartridge. To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. (Red) Changing the filter on time provides you with the freshest, cleanest water from your refrigerator. 111 Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise. 222 Pull the water filter ( 1 ) from the case filter ( 2 ). 2 1 •• To change the water filter more easily, shut off the water supply valve. •• Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard. •• When you pull the water filter, a little 2 water can leak from the opening. This is 3 normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it. •• To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ). 333 Insert the new filter into the filter case ( 4 ). 444 Push the filter, and then turn it clockwise until it locks. •• If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve. •• The locked symbol should be lined up with the indicator line. 4 555 Touch the "Ice Type/Water Hold 3 sec for Filter Reset" button ( ) for (Filter Reset) about 3 seconds to reset the water filter. The color of indicator ( ) changes from red to off. 666 If you turned off the water supply, turn it back on. For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the SAMSUNG logo on the box and on the water filter. Link : http://www. samsungparts.com operating _13 DA68-02601A(EN+FR+ES)-0.2.indb 13 2012.3.31 9:49:46 AM